Fat Bottom Harp Mics
Custom Made Harmonica Microphones
Fat Bottom Mics
Fat Bottom Mics CR repair

This convenient, FREE form below was created due to all of the options that harp players require when
searching for a custom Harp Mic. It is my best attempt to simplify the process for obtaining the most detail in
the fastest way possible for your specific Harp Mic build. There is no obligation to fill out the form and it's
easy, so feel free to give it a try.

If you find this form is difficult to use or if the form is
not working, please feel free to contact me direct at:
chuck@fatbottom-mics.com

With the information provided from the form below, I will do my absolute best to help you make a
informative decision based on my past experience and your specific ideas for a custom Harp Mic build
tailored specifically for you, by
Fat Bottom Mic's
Click On the Blue letters for more information and pictures.
*  Required fields
* Your name:
* Valid email address:  
PLEASE BE SURE YOUR E-MAIL IS SPELLED CORRECTLY OR I CAN NOT CONTACT YOU.
* Your phone number:  
* Zip code, or town:       
      (For shipping purposes).
* Country:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microphone Shell Types
Are you supplying your own microphone
shell? Check Yes and describe here.

If NO, please check No and select from one
of the shell types below.
Yes
No
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shure Bullet Mics, # 9, 12, 15, 18, 19, 22, 23, 32,
38, 39, 51, 66, 67, 68
Click here if you are not familiar
with the different microphone
shell types. Find the number next
to the picture of the shell you are
interested in, then choose one of
the buttons to the left.
Turner BX Chop Shell, # 4, 7, 10, 41 Requires Paint
Turner Desk Chop, 27, 30, 33, 37     Requires Paint
Astatic JT-30 Shell, # 2, 5, 6, 17, 20, 24, 29, 45, 47,
50, 58, 62
Astatic Biscuit Mic # 8, 34, 41, 49, 65
Astatic 200s Chop Shell, #21, 42, 48 Requires Paint
Big Walter Style Chop shell, # 3, 61, 64      
Requires Paint
Do you need some other type of mic shell? Check
here and describe if you see it on the
"Past Mic Builds" page.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Paint or Finish Desired
Do you need paint work? If Yes, please check
button here and describe the color you prefer,
or use one of the other finish types below.
Yes
No
No paint or finish is needed.
Factory painted shell (possible
chips in paint), check here.
Example of factory painted Mics # 48,
50, 51, 52, 55, 60, 66  Click here
Example of polished metal Mics # 8,
53, 63 Click here
Polished Metal and Clear Coated.
(No guarantee on clear coat  adhesion)
Example of brushed Mics # 6, 10,
22  Click here
Brushed Finish. (No guarantee on clear coat adhesion)
Do you need custom Art Work or
custom paint, please describe here.
Example custom art work Mics # 2, 3, 4, 5, 9,
14, 16, 17, 35, 41, 42, 49, 58 Click here
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Volume Control ? (VC)
Yes
Do you have an existing Volume Control (VC)?
No
Do you want a VC installed? Check Yes or No
here. If yes please use one of the VC location
choices below.
Yes
No
Please select Volume Control Location? (VC)
VC front hole examples # 4, 12, 13, 15, 17, 19, 20, 22, 23, 24, 25, 29
Click here
VC location front, or front stand hole.
(Mainly JT-30 & Shure Bullet style shells)
VC custom rear mount examples # 6, 8, 34
Click here
VC location custom rear mount.
VC rear apex examples # 2, 10, 47
Click here
VC location rear apex mounted. Mainly chopped mics.
VC far rear point examples # 7, 14, 16, 21, 27, 30, 33, 38, 41
Click here
VC location, far rear point of the microphone.
If other VC location is required? Please check
here and describe.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Element Type Desired, or are you supplying your own?
Are you supplying your own element?  If Yes,
please click Yes and describe element here.

If No please click No and select a choice
below.
Yes
No
(Click picture)
Black label CR 1949-1953
"Controlled Reluctance"
===========>
White Label CR 1954-1958
"Controlled Reluctance"
===========>
Click picture to enlarge.
3 digit code CM 1958-1961
"Controlled Magnetic"
===========>
2 letter code CM 1962-1996
"Controlled Magnetic"
===========>
Not sure of the element type or if  you are
looking for "another type" of element? Check
here, and try to describe the element, or write
"Not Sure".
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Do you need a custom gasket for your mic build, or will you provide your own?
(Click picture to enlarge)
Yes, please provide me with a gasket.
Example of
Shure 520
gasket..
No, I will provide my own gaasket.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What type of fitting do you prefer or do you already have one?
If you have your own existing fitting already in
your shell, click here and describe.
Example 5\8ths
Do you need a 5/8ths screw-on fitting?
(Recommended).
(Click pictures to enlarge)
Example 1/4"
Do you need 1/4" Guitar style fitting?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Fitting Location?
Example mic # 2, 10, 47, on the
Click here
Front, closest to the grill?
(Generally on custom chopped mics).
Like most mic examples on
Click here
Rear, near back of mic shell?
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If a 5/8ths screw-on fitting was chosen from above, do you need a
1/4" adapter as pictured?
Click here if you do not
understand how the 332A
adapter will work for you
Yes, I need a 1/4"adapter.
No, I do not need a 1/4" adapter.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Do you need a Fatbottom Vintage Style Tweed Cable?
Discount on cable with
microphone purchase. Cable
specs on "Cables and Parts" page
No, I do not need a cable.
 No
Yes, I would like a cable. If yes click here
and choose cable style and color below.
Yes
Standard 1/4" &  5/8th" screw-on cable,
model # VTC-1/4-5/8.  (Check cable color below)
Click picture
to enlarge.
=====>
Standard double gold tipped 1/4 to 1/4 inch
"Guitar style" cable, model # VTC-1/4-1/4.
(Check cable color below)
Click picture
to enlarge.
=====>
Gold Tip 1/4"
If cable is needed, please choose from Cable Color Samples here.
Vintage Brown Tweed

Black and Silver Tweed

Red and Black Tweed
=====>
Click picture
to enlarge
=====>
=====>
Note: Black and Red cables come
with black shrink wrapped ends.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Do you have other details or specifications you would like to add,
or if you don't understand something, please try to describe here?
Please be patient, I get a lot of inquires and it takes time to get to
everyone along with getting actual mic building done as well.
Thank you for your patience.
Click
once to
<=======
Reload
code.

Please enter the code in the box below and press "Submit Form".

If you can not read the code clearly or if the form does not submit,
press the blue "Reload Code"
 once to reveal a new code.
Enter code here. ======>
If you find this form is difficult to understand or if it
does not work, please feel free to contact me at:
chuck@fatbottom-mics.com
Build a Harp Mic Form
Free to fill out, no obligation.
Please use the form below if you would like
a Custom Harp Mic built to your
specifications.
**All shells and element prices are based on market price, and availability.**
Have A Tailor Made Harp Mic Built To Your Specifications!
In each titled
category,
please try to
fill in at least
one option
even if it
doesn't pertain
to your mic
build, as it
will help me
to know what
you need and
don't need in
your build.
In each titled
category,
please try to
fill in at least
one option
even if it
doesn't pertain
to your mic
build, as it
will help me
to know what
you need and
don't need in
your build.
In each titled
category,
please try to
fill in at least
one option
even if it
doesn't pertain
to your mic
build, as it
will help me
to know what
you need and
don't need in
your build.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------