Fat Bottom Harp Mics
- High quality 3:1 adhesive lined shrink tubing used on all 5/8th screw-
on fittings to lock the spring relief, housing and cable altogether as one
- Hand-soldered Gold plated 1/4" tipped plug
- Hand soldered 5/8ths Switchcraft vintage style screw-on fitting
- Double & Triple layer shrink wrap
- Convenient sewn on hook & loop tie strap
- Wire gauge (AWG): 20
- Center conductor: Oxygen-Free Stranded Copper center conductor
- Inner Insulation: White polyethylene encapsulation
- 2nd layer: Conductive PVC (98% black carbon PVC)
- Shielding material: Copper stranded oxygen free braided shielding
- 1st outer jacket material: PVC outer jacket
- 2nd outer covering material: Vintage style brown/yellow cloth tweed
- Capacitance pF/ft: 33.27 fF/ft (109pF/M)
- Termination method: Silver solder.
Hold your cursor over each picture to see the process of shielding, high quality shrink tubing, and quality fittings.
|
Cable Specifications: 20 foot Harmonica Microphone Cables (Custom lengths available on request)
|
Fat Bottom Harp Mic Cables
Double ended 5/8ths screw-on Switchcraft fittings, $10.00 extra, by request.
Custom lengths under 20' available by request.
_______________________________________________________________
INTERNATIONAL BUYERS: Please contact me first for total at
chuck@fatbottom-mics.com.
_______________________________________________________________
US Customers:
Price each: $44.95
$6.00 US Priority shipping for first cable purchase.
Additional $2.00 shipping per cable. (automatically calculated)
Vintage tweed 1/4" to 5/8th" Screw-on Harp style cable.
Model # VTC-1/4-5/8 (Colors available below).
Please specify color in checkout.
INTERNATIONAL BUYERS: Please contact me first for total.
chuck@fatbottom-mics.com
Order high quality harp mic cables and parts below.
Price Each: $44.95
Vintage tweed double 1/4 to 1/4" gold tipped fittings
(Guitar style cable). Model # VTC-1/4-1/4 (Colors available below).
Please specify color in checkout.
INTERNATIONAL BUYERS: Please contact me first for total.
chuck@fatbottom-mics.com
Price Each: $44.95
Price Each:
$12.00
5/8ths to 1/4" Adapter (Switchcraft 332A)
|
5/8ths screw-on fitting (Switchcraft) Model F-2501 Requires drilling and tapping shell for proper fit. (Not recommended for DIY)
|
Price Each:
$7.75
1/4" Barrel type fitting. Mainly used in chopped mics and to eliminate the 3 pin xlr in the Hohner Blues Blaster style mic shells. (Switchcraft)
|
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Price Each:
$9.95
1/4" Mono fitting. (Switchcraft)
Price Each:
$6.00
Fatten up your tone with Fatbottom cables!
Vintage Tweed
Black/Silver
Red/Black
Cable Color Choices
Please specify the cable color
you prefer in the Paypal
checkout message area,
or drop me a line at:
chuck@fatbottom-mics.com
Note: Black/Silver & Red/Black cables
come with black shrink wrapped ends.
Vintage Tweed cables come with Brown
shrink wrapped ends.
2 Shure 520 Grill Screws. (One set. Nickel Covered Brass)
|
Price Per Set:
$5.00
Click on pictures to enlarge
Click on pictures to enlarge
Click on pictures to enlarge
Click picture to enlarge
Price Each:
$10.50
NEW! 5/8ths screw-on fitting With factory spline removed. (Switchcraft) Model FSR-2501 Requires drilling and tapping shell for proper fit. (Recommended for DIY)
|
NEW !!
Attention: All International customers, please read the new shipping terms on the "Contact Us" page.
|
Att: Due to the cloth cover, cables will start off slightly stiff
after shipping. With regular use they will loosen up. To lengthen
the life of the cable always wrap the cable in large loops (about
8” across) and tie with the convenient hook and loop tie strap.
________________________________________________________
Cable color choices below. You must state the color you prefer in the paypal checkout..
|